Comat Releco CMS-10R Installationsanleitung Seite 9

Step 4
Step 6
45013-051-54-007
Step 5
Step 4
Click on Pair button. Go to step 5.
Step 5
Enter the device serial number shown on the device to pair it. The 12-digit serial number
is located on the top of the device. (Part description no. 13)
Click on Pair button.
Step 6
Remove the transparent cover on the device.
Click the Pair button on the device. («Pair button» part description no. 7)
The device can now be configured and then it will be ready for operation.
With the choice of the service profile, for example «standard», you complete the device
set up and go into normal operation.
EN
9