Tool Operation; Power Supply; Charge - TEXA TTC Bedienungsanleitung

7 TOOL OPERATION

TTC must be used by qualified personnel.

7.1 Power Supply

The tool is powered with an internal battery.
The battery charge status is shown by a special icon.
ICON WHEN IT APPEARS
During use
During use
During use
During use
With tool switched on or off,
during recharge
With tool
during recharge
With tool switched on or off,
during recharge

7.1.1 Charge

The internal battery can be recharged in two ways:
by connecting the tool to a PC
•
by connecting the tool to the mains using the specific battery charger (if
•
provided)
Do not charge the tool in environments with temperature lower
than 0 °C or higher than 45 °C.
Do not use the tool while recharging.
50
MEANING
Battery charge lower than 26%.
Recharge as soon as possible.
Charge level between 26% and 50%.
Charge level between 50% and 75%.
Charge level between 75% and 100%.
Battery in charge.
switched off,
Charge complete.
Internal battery charger not working.