Mounting Cutout - Siemens SIMATIC IFP1500 ETH Produktinformation

22" device Front and side views, neutral
①
Recesses for one mounting clip each
②
Display with touch screen
Interfaces
①
X80
②
X1
③
④
X70
⑤
X61/X62
⑥
X60
Installing devices
Permitted mounting positions
The same mounting positions and ambient temperatures apply to the devices as specified in the "SIMATIC HMI Industrial
Flat Panels IFP, IFP PRO, IFP ETH" operating instructions for the corresponding devices, but with the following extension:
For vertical mounting (0° tilt angle) in landscape format, the permissible ambient temperature during operation is maximum
+50 °C, with 22" device +45 °C, see also the section "Technical specifications (Page 14)".

Mounting cutout

Dimensions of the mounting cutout for installation of devices in landscape format (width × height):
● 15" device: 382 × 241
+1
● 19" device: 448 × 278
+1
● 22" device 513 × 315
+1
Width and height should be reversed accordingly when mounting in vertical format.
The specifications for stability of the mounting cutout and degrees of protection in the operating instructions "SIMATIC HMI
Industrial Flat Panels IFP, IFP PRO, IFP ETH" apply.
10
Connection for 24 V DC power supply
Ethernet interface
Not used
DisplayPort port
USB Type A
USB Type B
mm
+1
mm
+1
mm
+1
SIMATIC IFP1500/1900/2200 ETH
A5E41610279-AE, 10/2021