Moving method
Handle - Two handles are designed on
both
ends of the middle cover. When moving
the Product, lif t the end opposite of the
castor, grasp the handle and move the
Product to the desired place.
Storage
Befo re clean ing, ensure the power switch is turn ed off, and the attach ing plug is pulled out o f the socket. The rubber pedal an d
co vers can be clean ed with a wet cloth co ntaining d eterg en t, and the detergent sh ould be removed with a cloth.
NOTICE : Do n o t clean the product with corro sive detergent such as benzene o r th inn er, as it may cause fading, corrosion or crack on the
!
Product. Do not splash water into the product to avoid short circuit.
CONTROLLE R
As wet cloth may cause malfunction of the controller, only dry cloth can be used.
Storage and maintenance
Make sure that the power switch is turned off and the plug is removed from the power supply
Clean off the dust and dirt on the Product and keep it clean and away from places with high temperatueę or high humidity.
If the Product is not in use for a long period, a dustproof cover (but it yorself) should be applied on the Pro- duct to prevent the
entry of dust.
Common problems & Solutions
1. Emerg en cy sto p: Led o n console shows '' Er-3", Led o n PCB flashes th ree Times.
2. Co n n ectio n erro r: Led o n console shows ''ER-4", Led o n PCB flashes fo ur Times.
3. Electron power tube demage: Led on console shows ''ER-5", Led on PCB flashes five Times.
4. Current Overload: Led on console shows ''ER-6", Led on PCB flashes six Times.
5. Engineer abnormality: Led on console shows ''ER-7", Led on PCB flashes seven Times.
6. Blocked Engineer: Led on console shows ''ER-8", Led on PCB flashes eight Times.
7. Low voltage: Led on console shows „ER-9", Led on PCB flashes nine Times.
Technical specyfication
Rated voltage: 220-240 V
Rated power: 240 W
Rated frequency: 50/60 Hz
Maximum user weight: 150 kg
Assembly size: 76*44*13cm
G.W./N.W.: 17/15,5kg,
Massage mat
Handle