Cleaning The Sponge Filter; Optional Accessories - Makita CW001G Gebrauchsanleitung

• Clean around the interior of the chamber to pre-
vent odor.
• Clean the dust on the sponge filter regularly to
improve the refrigeration efficiency.
• The sealing strip of the upper cover is easy to get
dirty, clean it in time.
Defrosting
To defrost, turn off the power and wait until the frost has
melted. Then wipe off the water.

Cleaning the sponge filter

CAUTION:
After cleaning the sponge filter,
be sure to install it on the appliance. Operating
the appliance without the sponge filter may cause
malfunction.
1. Slide the filter cover in the direction of the arrow
shown in the figure, and then take the filter cover
off.
2. Take off the sponge filter, clean the sponge filter.
► Fig.9
3. Install the sponge filter and the filter cover back.
► Fig.10
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• AC adaptor
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
13 ENGLISH