Herunterladen Diese Seite drucken

Viessmann 5205 Bedienungsanleitung Seite 2

Verteilerleiste mit powermodul

Werbung

DE
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des Produktes
bzw. dessen Einbau diese Bedienungsanleitung aufmerk-
sam durch. Bewahren Sie diese auf, sie ist Teil des Pro-
duktes.
1.1 Sicherheitshinweise
Vorsicht:
Verletzungsgefahr!
Für die Montage sind Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdose einfüh-
ren! Verwendetes Versorgungsgerät (Transformator,
Netzteil) regelmäßig auf Schäden überprüfen. Bei Schä-
den am Versorgungsgerät dieses keinesfalls benutzen!
Alle Anschluss- und Montagearbeiten nur bei abgeschal-
teter Betriebsspannung durchführen!
Ausschließlich nach VDE/EN gefertigte Modellbahn-
transformatoren verwenden!
Stromquellen unbedingt so absichern, dass es bei einem
Kurzschluss nicht zum Kabelbrand kommen kann.
1.2 Das Produkt richtig verwenden
Dieses Produkt ist bestimmt:
-
Zum Einbau in Modelleisenbahnanlagen und Dioramen.
-
Zum Anschluss an einen Modellbahntransformator
(z. B. Art. 5200) bzw. an eine Modellbahnsteuerung mit
zugelassener Betriebsspannung.
-
Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als nicht be-
stimmungsgemäß. Für daraus resultierende Schäden haftet
der Hersteller nicht.
1.3 Packungsinhalt überprüfen
Kontrollieren Sie den Lieferumfang auf Vollständigkeit:
-
Verteilerleiste mit Powermodul und Anschlusskabeln
-
2 Schrauben
-
Anleitung
2. Einleitung
Die Verteilerleiste mit Powermodul, Art. 5205 erzeugt aus einer
Wechselstromspannung, wie sie vom Lichtstromausgang eines
handelsüblichen Modellbahntransformators geliefert wird, eine
geglättete Gleichspannung.
Das kompakte Modul für einfachen Anschluss und helle, flacker-
freie LED-Beleuchtung. Die oben auf dem Modul gut zugängliche
Steck-Verteilerleiste ermöglicht den bequemen lötfreien Anschluss
von 12 Stromverbrauchern durch einfaches Einstecken ihrer
Widerstände und Dioden in die Buchsen der Leiste – ideal für
die Etageninnenbeleuchtung, Art. 6045 – 6048. Um auch sehr
dünne Kabel und Litzen steckbar zu machen, empfehlen wir die
Adapterstifte für Verteilerleisten, Art. 6044. Die Verteilerleiste ist mit
weiteren Steck-Verteilerleisten, Art. 6049 erweiterbar.
2
EN
1. Important information
Please read this manual completely and attentively before
using the product for the first time. Keep this manual. It is
part of the product.
1.1 Safety instructions
Caution:
Risk of injury!
Tools are required for installation.
Electrical hazard!
Never put the connecting wires into a power socket!
Regularly examine the transformer for damage. In case
of any damage, do not use the transformer.
Make sure that the power supply is switched off when
you mount the device and connect the cables!
Only use VDE/EN tested special model train transform-
ers for the power supply!
The power sources must be protected to avoid the risk
of burning cables.
1.2 Using the product for its correct purpose
This product is intended:
-
For installation in model train layouts and dioramas.
-
For connection to an authorized model train transformer
(e. g. item 5200) or a digital command station.
-
For operation in dry rooms only.
Using the product for any other purpose is not approved
and is considered inappropriate. The manufacturer is not
responsible for any damage resulting from the improper
use of this product.
1.3 Checking the package contents
Check the contents of the package for completeness:
-
Power module with plug-in rail and connection cables
-
2 screws
-
Manual
2. Introduction
The power module with plug-in rail, item 5205 generates
smoothened DC from the AC input which is supplied by a
standard model train transformer.
The compact module offers easy connection and bright,
flicker-free LED lighting. The plug-in rail at the top allows
a comfortable connection of 12 loads without soldering,
just by plugging the leads of the resistors and diodes into
the sockets of the plug-in rail. Ideal for the interior lighting
sets, items 6045 – 6048. For easy handling of very thin
cables and litz wires we recommend to use adapter pins
for rails, item 6044. The plug-in rail is extendable with item
6049.

Werbung

loading