Herunterladen Inhalt Inhalt Diese Seite drucken
Viessmann 4511 Bedienungsanleitung

Viessmann 4511 Bedienungsanleitung

H0 form-vorsignal dreibegriffig, mit zwei antrieben

Werbung

Bedienungsanleitung
Operation Manual
4511
H0 Form-Vorsignal
dreibegriffig, mit zwei Antrieben
H0 Semaphore Distant Signal
three-aspect signal, with two drive units
1. Wichtige Hinweise / Important information ........................................................ 2
2. Einleitung / Introduction ..................................................................................... 3
3. Aufstellung / Setting up signals ......................................................................... 3
4. Funktionskontrolle / Checking the function ........................................................ 3
5. Einbau / Installation ........................................................................................... 4
6. Anschluss / Connection ..................................................................................... 4
7. Fehlersuche und Abhilfe / Trouble-shooting ...................................................... 8
8. Technische Daten / Technical data .................................................................... 8
Innovation,
die bewegt!

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Viessmann 4511

  • Seite 1: Inhaltsverzeichnis

    Bedienungsanleitung Operation Manual 4511 H0 Form-Vorsignal dreibegriffig, mit zwei Antrieben H0 Semaphore Distant Signal three-aspect signal, with two drive units 1. Wichtige Hinweise / Important information ............2 2. Einleitung / Introduction ..................3 3. Aufstellung / Setting up signals ................. 3 4.
  • Seite 2: Wichtige Hinweise / Important Information

    1. Wichtige Hinweise 1. Important information Bitte lesen Sie vor der ersten Anwendung des Produktes Please read this manual completely and attentively before bzw. dessen Einbau diese Bedienungsanleitung auf- using the product for the first time. Keep this manual. It is merksam durch.
  • Seite 3: Einleitung / Introduction

    Viele weitere Informationen über Signale finden Sie im Viessmann-Signalbuch, Art. 5299. For more information regarding signals please refer to Viessmann signal book, item 5299 – German language. 4. Funktionskontrolle 4. Checking the function Nehmen Sie das Signal vorsichtig aus der Verpackung.
  • Seite 4: Analoge Ansteuerung

    Refer to fig. 7 for the correct wiring. an den Viessmann Motorola-Magnetartikeldecoder, Art. When connecting e. g. to the Viessmann Motorola digital 5211 (MM) müssen Sie darauf achten, dass neben den decoder, item 5211 (MM) you have to make sure to...
  • Seite 5 (e. g. Lenz, teres mit allen Magnetartikeldecodern (z. B. von Lenz, Trix Trix etc.) as these supply negative pulses. Viessmann is, etc.) schalten, da diese Decoder negative Schaltimpulse therefore, supplying decoders providing positive switching liefern.
  • Seite 6 (DC = right rail in driving direction, AC = third rail). Formsignal mit zwei Antrieben. Semaphore signal with two drive units. Steuermodul. Nicht entfernen! Control module. Do not remove! z. B. / e. g. Tasten - Stellpult 5216 Viessmann 5548...
  • Seite 7 Abb. 7 Fig. 7 rot / red braun / brown Viessmann 5211 Magnetartikeldecoder z. B. / e. g. 5211 gelb / yellow Steuermodul. Nicht entfernen! grün / green Control Unit. Do not remove! rot / red 3 x blau / blue...
  • Seite 8: Fehlersuche Und Abhilfe / Trouble-Shooting

    Schaltkontakt mit Hilfe einer Stecknadel oder eines dün- partment (service@viessmann-modell.com). Please send nen Drahtes einmal nach oben bewegen (Abb. 8). the item to the Viessmann service department for check Sollte das Produkt fehlerhaft sein und Sie finden die Fehlerur- resp. repair only after consultation sache nicht, nehmen Sie bitte Kontakt mit uns auf (service@ viessmann-modell.com).Senden Sie uns den Artikel zur Kont-...

Inhaltsverzeichnis