Operation; Care And Cleaning; Technical Data - Eurochron KA003 Bedienungsanleitung

Operation

The device has a built-in timer. It operates for one hour and pauses afterwards for four hours.
Then, the cycle starts again.
This function ensures that the watch is always wound up, but is not overly wound up or moved
unnecessarily.
Always switch off the device before inserting or removing a watch.
Disconnect the device from the mains supply if you are not going to use it for a while
(pull the power adapter from the mains socket).
Do not move or shake the device when it is in use.
• Open the cover and pull out the watch holder.
• If you want to insert a smaller ladies' watch, remove the bigger fixture for men's watches
from the holder.
• Press the watch holder together, and attach your watch to it together with the strap.
• Insert the watch holder in the fixture within the device.
• Close the cover.
• Move the control switch in the desired direction of rotation.
• To switch off, move the control switch back to the central position (STOP).
Some automatic watches can only be wound in one direction. Please find the ap-
propriate information in your watch's manual.
For watches with a glass housing and a visible rotor, the rotation can also be deter-
mined when turning the rotor by movement of the watch. The direction, in which it is
more difficult to move the rotor, is the one used to wind the watch.

Care and cleaning

Disconnect the watch winder from the mains before cleaning it (unplug the power
adapter from the mains socket).
Never use abrasive cleaning agents, cleaning alcohol or other chemical solutions,
since these could damage the housing or even impair operation.
Use a dry, slightly damp, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
In so doing you will fulfil your statutory obligations and contribute to the protection of
the environment.

Technical data

Operating voltage ......................... 100-240 V / 50/60 Hz (power adapter)
...................................................... 4 V/DC (watch winder)
Power consumption ...................... 1.5 / 0.1 W (operation/standby)
Operational interval ...................... 1 h of rotation / 4 h of pause
Winding direction .......................... clockwise
...................................................... anticlockwise
Dimensions (W x H x D) ............... 163 x 150 x 126 mm
Weight .......................................... approx. 0.4 kg
All manuals and user guides at all-guides.com
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE. 1542353_V1_0317_02_VTP_m_en