Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
KA003 Watch Winder white
Item no. 1542353
Intended use
The watch winder is for agitating mechanical automatic watches and thereby winding them.
It must only be used with the power adapter that is included in delivery.
The power adapter is only suitable for use in common household sockets of the national grid.
Use of the watch winder and of the power adapter is only allowed in closed, indoor locations,
i.e. not outdoors. Contact with moisture, for example in bathrooms or the like, must be avoided.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, you may inflict damage on it. Further-
more, an improper use involves risks such as short-circuits, fire, electric shocks, etc. Please
read the operating instructions carefully and do not discard them. If you pass the product on to
a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Watch winder
• AC adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of per-
sonal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specific tips and information on the operation are
provided.
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Please handle the product carefully. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• Do not use the device in a tropical climate.
• Do not expose the device to high temperatures, dripping or sprayed water, strong
vibrations or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or close to the watch
winder.
• Never pour any liquids above or next to the product. Do not place any containers
with liquids, e.g., vases or plants, on or next to the product. Liquids may seep into
the casing and thus impair the electrical safety of the device. Furthermore, there is
a significant risk of fire or of a lethal electric shock!
• From time to time, check the device and the power unit for damage. Do not touch
the power adapter, the watch winder or the connecting cable if they show vis-
ible signs of damage. First, switch off the appropriate mains socket (e.g., via the
respective circuit-breaker and the RCD) and then carefully pull the power adapter
from the mains socket. Do not use the product after that and take it to a specialised
workshop instead.
All manuals and user guides at all-guides.com
Set-up
• When selecting the set-up location, take the room layout into consideration (e.g., location of
• Also keep in mind, when selecting the set-up location, the need to avoid proximity to direct
• Keep the device away from powerful transformers or motors.
Connecting the power adapter
• Connect the low voltage adapter of the power adapter with the socket on the rear of the
• Plug the power adapter into a wall socket.
• Never replace a damaged connecting cable of power adapters. If the connecting
cable is damaged, the power unit is unusable and must be disposed of. Repairs
are not permitted.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• In order to disconnect the watch winder completely from the mains supply, the
power adapter has to be disconnected from the mains socket.
• Please observe the additional safety instructions in the individual chapters of this
manual.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
• Never use the product immediately after moving it from a cold room into a warm
one. The condensation that forms may damage the product under certain circum-
stances. A power unit also carries the risk of a potentially fatal electric shock!
Allow the product to reach room temperature before connecting it to the power
supply and putting it into use. In some cases, this may take several hours.
The device should be operated only on a stable, level surface.
Make sure the appliance is well-placed; devices can fall and thereby causing un-
wanted accidents.
Avoid heavy impacts, or moving the device, especially when it is in use.
the nearest socket, etc.).
sunlight, vibration, dust, hot and cold temperatures and dampness.
In view of the variety of paints and polishes used for furniture, the base of the device
may leave visible marks on the furniture on which it is placed, as a result of a chemi-
cal reaction. Therefore, do not place the device on the surface of valuable furniture
without appropriate protection.
Only the enclosed power adapter may be used for the mains connection.
Connect the power adapter only to a normal mains socket connected to the public
supply.
Make sure that the voltage indicated on the power adapter corresponds with the
mains voltage of your power supply. Never attempt to operate the device with any
other voltage.
Make sure that the connecting cable is not pinched or damaged by sharp edges
when making the connection.
The mains socket to which the power unit is connected must be easily accessible,
so the device can be quickly isolated from the mains power supply in the event of a
fault.
device.
Werbung
Inhaltsverzeichnis
