Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PROGRAMME CONTROL
The button illustrated is the
P
programme control. The Eva
has eight different, specially
developed programmes. When the unit
is first switched on it automatically
enters the programme FACE 1.
Each time you press and release the
PROGRAMME CONTROL button, the
programme changes and is shown on
the LCD.
Each time you change the programme,
the strength level reverts back to zero.
This is a safety feature to alleviate any
sudden feeling of a surge, as each
programme gives a different sensation.
PHASE SKIP
All
the
programmes
FACE 1 have seven phases.
The bar column in the middle of the
display increases as each phase starts:
Phase 1
Phase 2
And so on up to the 7
This button can be used to skip a
phase. Press and hold this button for 3
to 5 seconds to skip and go to the next
phase
of
the
selected
session.
LOW BATTERY
An empty battery symbol will
show
when
change the batteries. The unit will shut
down about 2 minutes after this.
except
Phase 3
th
phase (7 bars).
treatment
you
need
to

KEYPAD LOCK

If you do not press any keys
for 30 seconds, the keypad
will lock so that only the keys marked
CH1▼ or CH2▼ will work. This is to
avoid accidental changes in setting. To
unlock, press either CH1▼ or CH2▼
keys.
OPEN CIRCUIT CUTOUT
If the Eva is not correctly connected to
your body, the strength in the channel
which is not properly connected will
automatically reset to zero. This is to
prevent sudden changes if a broken
connection is re-made.
MEMORY
The Eva has a Memory with three
functions:
1) Programme Retention. When you
switch the unit on, it will automatically
start in the programme which was being
used when it was switched off.
2) Usage. Press the phase skip button
and CH1▼ together and hold down for
3 to 5 seconds. The display will show
the number of times used and duration
in hours used.
Press the same buttons again to return
to normal controls.
3) Memory Reset. To reset memory to
zero, hold down the phase skip and
power buttons together for 3 to 5
seconds.
26

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis