Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EATON
3.3
Accessory Installation
3.3.1
Sunshield Installation
Sunshields are supplied uninstalled to prevent damage during shipping and unpacking. They are
supplied with a protective white film that must be removed prior to installation.
The correct sunshield fixings, for each model, are supplied with the camera system and should
be positioned as detailed below.
To mount the sunshields, first they must be positioned correctly and fixed with a Nylon spacer
between the sunshield and the camera housing, the M6 A4 Button head screws supplied must
have the red fibre washer fitted before fixing the sunshield. (Fig 9 & 10)
Long and Medium sunshield have four equally sized fixings for each corner but the short
sunshield has two fixing types, one for the front and shorter screws and nylon spacer at the
rear. (Fig 10)
Fig.9
Mid and Long Housing Sunshield Installation
Fig.10
Short Housing Sunshield Installation
© 2018, EATON
Installation Instructions
IM-SF-SC-SP-ST Issue 4
Page 12 of 40
Werbung
Kapitel
Inhaltsverzeichnis
