EATON
3.2.3
Mounting the XF Series
The XF Series fixed housing assemblies may be mounted onto various structures such as
bulkheads, walls or towers. The units have a mounting plate on the bottom of the housing tube
that have
four (4) No. M6 Threaded fixing points. (Fig 6)
The type and size of these fixings to be supplied by the user/installer and must be suitable for
the specific installation requirements.
To gain flexibility of the cameras view direction one of the EATON brackets is needed, these
comprise of the BFP00SW Swivel joint (Fig 7), the BFW32SW (Fig 8) or a combination of the
BFW5000 and BFP00SW. (Figs 4 & 7)
Depending on Housing length, some wall brackets do not allow for the camera to view directly
away from the Wall and must be rotated or tilted to allow room for gland entry.
Fig.6 XSF40V Example SF Series unit showing mount plate fixing points
Fig.7 BFP00SW Swivel Joint & Pole Top Adaptor
Fig.8 BFW32SW Swivel Joint & Pole Top Adaptor
© 2018, EATON
Installation Instructions
IM-SF-SC-SP-ST Issue 4
Page 11 of 40