Before You Start - defunc TRUE MUSIC Bedienungsanleitung

BEFORE YOU START

Make sure the earbuds are fully charged. Do this by
charging the earbuds in the charging case. Also plug
the USB-C charging cable into the USB-C port on the
charging case. Plug the other end of the cable into a
power source and charge until all 4 LED lights on the
charging case are stable.
PAIRING EARBUDS AND DEVICE
1. Take out the earbuds from the charging case.
The earbuds will automatically power on and pair
with each other. When blue/red lights flash alterna-
tely, the earbuds are ready to pair with your device.
2. Turn on the Bluetooth function on your device. Select
Defunc TRUE MUSIC in the Bluetooth list to pair the
earbuds with the device. The earbud lights turn off
when the earbuds are paired. The earbuds will
automatically pair with a previously connected
device when powered on again.
POWER ON
There are two ways to turn the earbuds on:
1. Open the charging case and take out the earbuds for
auto-power on.
2. Press each earbud for 3 seconds until you hear the
on-sound.
The earbuds will also auto-pair with each other when
you power on.
5