Inhaltszusammenfassung für RCS AUDIO-SYSTEMS PHM-802 C
Seite 1
All manuals and user guides at all-guides.com PHM-802 C AMPLIFIER MONITORING - ENGLISH OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNG - DEUTSCH...
All manuals and user guides at all-guides.com PHM-802 C SAFETY INSTRUCTION CAUTION / ACHTUNG CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SER- VICIING TO QUALIFIED PERSONNEL. ACHTUNG: ZUR VERMEIDUNG VON STROMSCHLÄGEN GEHÄUSEAB- DECKUNG ODER RÜCKSEITE NICHT ENTFERNEN.
Seite 3
INTRODUCTION EINLEITUNG PHM-802 C digital amplifier switchover unit is designed to Das PHM-802 C dient der Überwachung von bis zu 8 End- monitor up to 10 power amplifiers simultaneaously. Up to 8 verstärkern und zwei Havarieverstärkern. Im Fehlerfall wird, amplifiers can be configured as call amps, backed up by up je nach Konfiguration, auf 1 oder 2 Havarieverstärker um-...
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING OPERATING ELEMENTS PHM-802 C BEDIENELEMENTE PHM-802 C 1. Control Key 1. Funktionstasten When pressing this key, you can operate through the dis- Durch Drücken dieser Tasten bewegen Sie sich durch play-menu.
All devices connected to the bus are considered equivalent Alle am Bus angeschlossenen Geräte sind als gleichwertig and can therefore be wired in any order. So the PHM-802 C zu betrachten und können daher in beliebiger Reihenfolge can also be in the middle between the stations. A star- verdrahtet werden.
Seite 6
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING The following status is showed in line 1: Folgende Zustände des Gerätes werden in Zeile 1 ange- zeigt: Messasurement is active (a blinking coursor in line Messvorgang ist aktiv (dabei zeigt blinkender Cur- 2 shows the last checked amplifier) sor in Zeile 2 die gerade geprüfte Endstufe)
Seite 7
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING • The expected level can be modified for each amplifier: • Der Messpegel ist für jeden Verstärker einzeln anpassbar: Level of pilotton directly on the item via keybord or Pegel des Pilottons direkt am Gerät per Tastatur oder...
Seite 8
Ability to regulate the toolsadresses, to use more Anpassung der Geräteadresse, um mehrere PHM-802 C on one BUS PHM-802 C an einem Bus zu betreiben Detailled protocoll of failures- and display in PSS- detaillierte Fehlerprotokollierung und -anzeige in der 224 C and in ConfigV3000 (logbook) PSS-224 C und im ConfigV3000 (Logbuch) •...
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING OVERVIEW OF DISPLAY MENUE AND FUNCTIONS ÜBERSICHT DISPLAY-MENÜ UND FUNKTIONEN 1. Monitor option 1. Monitoroption Possibility of listening to all connected power amplifiers Möglichkeit des Abhörens aller angeschlossenen Ver- including backup amplifier.
Seite 10
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING 6. Set measuring frequency 6. Messfrequenz einstellen Setting the measuring frequency with which the ampli- Einstellen der Messfrequenz mit der die Verstärker ge- fiers are tested prüft werden - Press the MENUE key - Taste MENUE drücken...
Seite 11
Hinweis: Dieser Menüpunkt erscheint nur, wenn die terface is installed in the device. Schnittstelle PHM-485B im Gerät installiert ist. DIRECT OPERATION OF PHM-802 C DIREKTE BEDIENUNG DES PHM-802 C (IN EXAMPLE TO REGULATE THE EXPECTED LEVEL MANUALLY) AM BEISPIEL DER MANUELLEN EINSTELLUNG DES MESSPEGELS Operation of the Back-up management directly on the item Die Bedienung des Havariemanagements direkt am Gerät...
EEPROM des Gerätes abgelegt und verwendet. 10. By pressing MENUE-Button the main-menue is closed, 10. Das Drücken der MENUE-Taste beendet das Hauptme- menue-LED lapes and PHM-802 C is in sleeping mode nü, die Menü-LED erlischt und das PHM-802 C befindet again.
Pegel, wird automatisch die Umschaltung auf die Reserve- available again. Endstufen rückgängig gemacht und die Reserve-Endstufen stehen somit wieder zur Verfügung. The PSS-224 C showes the following failures of PHM-802 C: Die PSS-224 C zeigt folgende Fehler des PHM-802 C an: Breakdown of mainpowersupply Ausfall der Hauptstromversorgung...
Seite 14
All manuals and user guides at all-guides.com PHM-802 C UNIVERSAL AMPLIFIER MONITORING Technical Data PHM-802 C Technische Daten PHM-802 C Display LCD Dot Matrix 2x24, illuminated, adjustable contrast, Anzeige LCD-Display, 24 Zeichen, zweizeilig, beleuchtet, bilingual zweisprachig Bedienung 4 Buttons, 1x illuminated...
Seite 15
The PMU-802A is an option module for emergency switching Das PMU-802A ist ein Optionsmodul für die Havarieum- PHM-802 C. It can be used to monitor all ten power amplifier schaltung PHM-802 C. Es können damit alle zehn Endstu- outputs without the need for additional wiring. The selection fenausgänge abgehört werden, ohne das eine zusätzliche...