Bestway Flowclear AquaDrift Gebrauchshinweise Seite 3

4.2
8
B
A
HOW TO USE THE PRODUCT
If the following situations occur during operation, please operate as shown to keep the robot in the best working condition.
1. During operation, if the hose sinks below the water surface, please adjust the position of the float.
2. When adapting to a high-flow pump, if the following situations occur, please refer to the operation diagram, and adjust the pressure relief valve knob to appropriately
reduce the running speed of the cleaner:
2.1. After the hoses are straightened out, serious hose entanglement occurred in continuous long-term operation;
2.2. The robot runs too fast, the wheels tip over or the wheels do not move along the bottom of the pool.
3. When the robot runs for a long time, if the running track does not cover most of the pool area, or the running track is repeated. Please adjust the wheel angle knob
appropriately.
4. When adapting to 1500 gal. filter pump, please remove the brush.
NOTE: It is normal for the robot to leak water at the water pipe joints during the water supply process.
1
2
4
5.2
B
A
6.2
3
3
7.2