Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL TE-SV 18 Li Originalbetriebsanleitung

Cleaning the fi lter cage
Clean the fi lter cage with a little soft soap under
running water and allow it to air-dry.
6.5 Cleaning the brush roller
Take the brush roller out of the housing (see the
section "Fitting/removing the brush roller"). Clean
the brush roller of everything that has collected
on it during use. Reinsert the brush roller in the
housing.
6.6 Cleaning the equipment head
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plas-
tic parts in the equipment.
6.7 Cleaning the container
The container can be cleaned with a damp cloth
and some soft soap.
7. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the battery before starting any
cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend that you clean the equipment
immediately after you use it.
7.2 Maintenance
Check the equipment's fi lter at regular intervals
and before each use.
7.3 Ordering spare parts
Please provide the following information on all
orders for spare parts:
•
Model/type of the equipment
•
Article number of the equipment
•
ID number of the equipment
•
Part number of the required spare part
For our latest prices and information please go to
www.Einhell-Service.com
Anl_TE_SV_18_Li_SPK13.indb 18
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defecti22ve equipment
in your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature.
The ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original pa-
ckaging.
- 18 -
08.07.2021 08:40:27