Thrustmaster T248 Bedienungsanleitung Seite 17

Use the directional buttons (7) in this menu as follows:
Navigation
2 options
3 displays
3 options
6 options
8 levels
6 options
2 options
1 display
1 option
Screen
XBOX/PC
Select your system:
Xbox console or
PC
ABOUT
General information
FFB
Select the Force
Feedback profile
(see FFB PROFILE
DIAGRAM section)
FORCE
Select the overall
wheel's force effect
level
ROT°
Select the angle of
rotation
(only for games in
which the angle of
rotation is not
automatic)
PEDAL
Select the pedal set
configuration
TEMP
Motor temperature
RESET
Reset the racing
wheel to default
mode.
16/32
Information / Options
- Selection of Xbox console (by default)
- Selection of PC system
Note: To validate your system choice,
press the MODE button (9). Selection
will be saved when EXIT appears on
screen.
- Firmware version of racing wheel
base
- Name of device connected to mini-
DIN connector (23)
- Type of pedal set connected to RJ12
connector (24)
- FFB 1
- FFB 2 (by default)
- FFB 3
- 270°
- 360°
- 540°
- 720°
- 900°
- AUTO = Automatic (by default)
- FLOOR: floor position (by default)
- INV.: suspended position
(the accelerator and clutch pedals are
reversed)
Racing wheel's motor temperature displayed
in real time
- N: No
- Y: Yes
Select Y, then press the MODE button (9).
The racing wheel is reset when EXIT
appears on screen.