Plantronics Savi 430 Kurzanleitung Seite 3

USB Adapter (D100)
Charging Charger Base
Indicator Light
Volume Up Button
Volume Down Button
(also controls mute)
Headset with Pre-Installed Eartip
Extra Eartips
4
Subscription Button
Indicator Light
Base Power Supply
USB Charging Cable
Call Control Button
Indicator Light
Microphone
1 Connecting USB adapter to PC
1-1. Insert the USB adapter into the USB port on the PC. The indicator light on the USB
adapter will be solid red to indicate the USB adapter is powered on and will turn solid green
when it finds the headset.
1-2. The adapter can be folded as shown.
NOTE The headset may need to be charged before the USB adapter can find it.
2 Connecting power supply to charger base
2-1. Connect the base power supply into the power jack on the charger base.
2-2. Connect the power supply to the outlet. The charging indicator light will be solid green.
3 Docking and charging headset
3-1. Gently push the headset into the charging cradle.
The charging indicator light on the charger base will
flash green to indicate that the headset battery is
charging.
3-2. Charge for at least 20 minutes prior to the first
use. A full charge takes 3 hours.
NOTE The USB charging cable can also be used to charge the headset.
NOTE The product has a non-replaceable battery. Contact Plantronics for replacement information.
4 Making a test call using Lync/Microsoft Office
Communicator
4-1. Ensure Lync/Microsoft Office Communicator is running on your PC.
4-2. With your headset on, press the call control button on the headset. The USB adapter
indicator light will flash green indicating a radio link is active with the headset.
4-3. Set the headset and microphone volume to a comfortable level using the Lync/
Microsoft Office Communicator "Set Up Audio and Video" page.*
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
5