Herunterladen Inhalt Inhalt Diese Seite drucken

Operating And Display Elements; Labeling - Balluff BNI IOW-302-W01-K080 Betriebsanleitung

Netzwerkschnittstelle
Vorschau ausblenden Andere Handbücher für BNI IOW-302-W01-K080:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BNI IOW-302-W01-K080
Network interface
4
Product description (continued)
4.3

Operating and display elements

For the location of the operating and display
elements, see Fig. 4-2 on page 8.
Pairing button
Before the communication between Master and Device
can be started, the devices must be paired with each
other. This is done using the pairing button.
Function
Action
mating, new
Press and hold the button as soon as
mating
the pairing process has been started on
the master.
Reset
Press and hold the button for more than
30 s.
Tab. 4-1:
Pairing button
LED US
Signal
Meaning
Red flashing,
U
voltage error, voltage lower than
S
3 Hz
approx.: 14V
Red,
Voltage outside the nominal range,
alternating
wireless IO-Link communication is
with LED off
running
in a ratio of
10:1, 1 s
period
Red, flashing,
Voltage outside the nominal range, the
1 Hz
module is paired
Red, static
Voltage outside nominal range,
communication not available
Green,
Voltage in nominal range, wireless
alternating
IO-Link communication is running
with LED off
in a ratio of
10:1, 1 s
period
Green
Voltage in nominal range, the module is
flashing, 1 Hz
paired
Green, static
Voltage in nominal range, the module is
not paired
Tab. 4-2:
LED US
www.balluff.com
LED UA
Signal
Meaning
Off
Voltage U
not available
A
Red, static
Voltage outside nominal range
Green, static
Voltage in the nominal range.
Yellow, static
Pairing button pressed
Yellow,
Pairing button action performed
flashing, 1 Hz
Tab. 4-3:
LED UA
Port-LEDs
Port/Pin LEDs
The port LEDs are assigned to pin 2 and pin 4 as follows:
LED 1 – Port-Pin 4
LED 2 – Port-Pin 2
Signal
Meaning
Both LEDs
Short circuit of sensor supply between
flashing red,
pin 1 and pin 3
1 Hz
Red, static
Short circuit at output of Pin 2/4 to Pin 3
Red, static
Actuator warning Pin 2/4
Yellow, static
State of input or output pin is 1
Off
State of input or output pin is 0
Tab. 4-4:
Port-LEDs
4.4

Labeling

1)
Order code
1)
2)
Type
Fig. 4-3:
Labeling (example)
2)
english
9

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bni00ffBni pnt-565-w01-k079

Inhaltsverzeichnis