Preliminary Test - Sensica SENSILIGHT mini Bedienungsanleitung

Preliminary Test

Before your first treatment
on each new body area, we
recommend you test your skin
in that area to determine your
skin's reaction to treatment
with the device and help you
set the optimal energy level for
each treatment area. Different
body areas may have different
sensitivity and may therefore
require different energy levels.
Perform a preliminary test on
a hidden patch of skin for
the area you intend to treat
24 hours prior to the first full
treatment.
Note: Do not treat full areas
with energy levels that you
have not tested before!
10
1. Prepare your skin as
described below in
"Prepare the area you
intend to treat" section.
2. Select the lowest energy
level and deliver a flash.
3. You can increase the
energy level as long as
it feels comfortable. You
may continue to do this up
to the maximum energy
level unless you begin to
experience discomfort.
Each energy level should
be tested on a new patch
of skin (do not overlap
flashes).
4. If you do not feel
comfortable or notice any
adverse effects, stop the
test immediately!
5. If there is no adverse skin
reaction after 24 hours,
you can proceed with a full
treatment using the highest
comfortable energy level
that you tested.