TFA 30.1066 Bedienungsanleitung Seite 7

TFA_No. 30.1066_Anleitung
Digital indoor-outdoor thermometer
• To toggle the display to the temperature meas-
ured by the cable sensor (OUT), press the
IN/OUT button (under the stand). Press and
hold the IN/OUT button for three seconds to
switch on the rotation function
door and indoor values will appear alternating
for 5 seconds.
• Press the MAX/MIN button (on the side) to dis-
play the maximum (MAX) and minimum (MIN)
temperature since the last reset and to return to
normal mode. Press and hold the MAX/MIN but-
ton for 3 seconds when MAX or MIN is dis-
played to reset the value.
• Display LL.L/HH.H°C: outside measuring range.
07.12.2021
. The out-
– 12 –
14:16 Uhr Seite 7
Digital indoor-outdoor thermometer
• Remove the battery to turn off the instrument, if
you do not use the device for a while.
• If your device fails to work, contact the retailer
where you purchased the product.
2. Installation
• For measuring outdoor temperature: lead the
cable with the sensing element through the
open window to the outside. Take care of sharp-
edged window frames – avoid frequent opening
and closing the window.
• The waterproof cable sensor is also ideal for the
temperature control of the refrigerator, freezer,
aquarium or terrarium.
– 13 –