Safety Warnings - Makita DTW181 Betriebsanleitung

Vibration
The vibration total
vector sum)
according to EN62841-2-2:
Work mode: impact
fasteners of
mum capacity of
Vibration emission (a
h
m/s 2
Uncertainty (K)
m/s 2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may
for comparing one
with another.
NOTE: The declared vibration emission value may
also be
a preliminary assessment
of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on
ways in
tool is used.
WARNING:
Be
identify safety
protect the operator that are based on an estimation
of exposure in
actual conditions of
(taking account
parts of
operating cycle
the times when the tool is switched off and
when it is running idle
to the
EC Declaration of Conformity
For European countries only
The EC declaration of
conformity is
Annex A
manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below
in electric
and/or serious
All manuals and user guides at all-guides.com
value (tri-axial
determined
tightening of
the maxi-
the tool
) : 10.5
: 1.5
be used
tool
used in
the
which the
sure to
measures to
the
use
of all
the
such as
in addition
trigger time).
included as
to this instruction
may result
shock, fire
injury.
Save all warnings and
instructions for future reference.
The term
the
your
power
operated (cordless) power
Cordless impact wrench safety
warnings
1. Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners
wire
metal
power
could give the operator an electric shock.
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
7. The proper fastening torque may differ
depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical
6 ENGLISH
"power tool" in
warnings refers to
mains-operated (corded)
tool or battery-
tool.
contacting a "live"
may make exposed
parts of the
tool "live" and