OcCre 53007 SAN FRANCISCO Bastelanleitung Seite 4

PHOTO 48. Paint the wrought-iron decorative brackets 90 black and glue them into place in the top corners of the vertical
beams, as shown. Paint handles 91 golden and glue them to the front pieces of the cabin. Use fast-acting glue.
PHOTO 49. Glue the decorations 92 to the panels at each end of the cable car using white glue. Using a knife open up the hole
on each for the headlamps 93. Paint the edges of the headlamp black and glue them in place. Paint the coupling links 94 black
and glue them to the bumpers. Use fast-acting glue.
PHOTO 50. Cut to size the edge-pieces 95 & 96. Paint them white and glue them in place using white glue. Glue on the
decorations 97, 98, 99 & 100. Glue a length of copper wire 102 inside the bell 103. Paint the bell and the pilot lights as shown.
Make holes in the roof where they are to be fitted and glue them into place using fast-acting glue.
We have designed this model with one single goal in mind: so that you will enjoy yourself while building a beautiful reproduction
of a magnificent scaled model. If we have achieved this, then our mission is complete.
Thank you.
OCCRE