Operation - IFM Electronic efector200 OW Serie Montageanleitung

Operation

Check the safe functioning of the through-beam sensor by means of
the 3 LEDs.
LED green
LED yellow
LED red error in object detection, e.g. maladjustment,
soiling of the lenses
LEDs red flashing alternately, 3 Hz: output short-circuited
+ yellow flashing alternately, 1 Hz: internal malfunction (output is not
switched)
Maintainance
Keep the lenses of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could
damage the plastic lenses.
All manuals and user guides at all-guides.com
supply voltage O.K.
output switched
LED
5