Functions and features
The through-beam sensor detects objects without contact and indi-
cates their presence by a switched signal.
Standard range: 4m.
Installation
Mount and fasten the receiver (OWE...).
Set the transmitter (OWS) towards the receiver and tighten in the same
way.
Maximum range only with precise alignment.
Electrical connection
Disconnect power before connecting the sensor.
Connection strictly to the indications on the type label;
core colours: BN = brown, BU = blue, BK = black.
Programming of the output function by wiring according to type label.
4
All manuals and user guides at all-guides.com