Bosch PCM 7 Originalbetriebsanleitung Seite 18

OBJ_DOKU-41582-001.fm Page 18 Thursday, July 24, 2014 2:44 PM
18 | English
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
 Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Chop and Mitre Saws
 The power tool is provided with a laser warning label
(marked with number 2 in the representation of the
power tool on the graphics page).
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
 Never make warning signs on the machine unrecognis-
able.
 Never stand on the power tool. Serious injuries can occur
when the power tool tips over or when inadvertently com-
ing into contact with the saw blade.
 Make sure that the guard operates properly and that it
can move freely. Never lock the guard in place when
opened.
 Never remove cutting remainders, wood chips, etc.
from the sawing area while the machine is running. Al-
ways guide the tool arm back to the neutral position first
and then switch the machine off.
 Guide the saw blade against the workpiece only when
the machine is switched on. Otherwise there is danger of
kickback when the saw blade becomes wedged in the
workpiece.
 Keep handles dry, clean, and free from oil and grease.
Greasy, oily handles are slippery causing loss of control.
1 609 92A 0VL | (24.7.14)
All manuals and user guides at all-guides.com
 Operate the power tool only when the work area to the
 Keep the floor free of wood chips and material remain-
 Always firmly clamp the piece to be worked. Do not saw
 Use the machine only for cutting the materials listed
 If the saw blade should become jammed, switch the ma-
 Do not use dull, cracked, bent or damaged saw blades.
 Always use blades with correct size and shape (dia-
 Do not use high speed steel (HSS) saw blades. Such saw
 Do not touch the saw blade after working before it has
 Never operate the machine without the insert plate.
 Check the cable regularly and have a damaged cable re-
 Store the machine in a safe manner when not being
 If laser radiation strikes your eye, you must deliberate-
 Do not make any modifications to the laser equipment.
workpiece is clear of any adjusting tools, wood chips,
etc. Small pieces of wood or other objects that come in
contact with the rotating saw blade can strike the operator
with high speed.
ders. You could slip or trip.
workpieces that are too small to clamp. Otherwise, the
clearance of your hand to the rotating saw blade is too
small.
under Intended Use. Otherwise, the machine can be sub-
ject to overload.
chine off and hold the workpiece until the saw blade
comes to a complete stop. To prevent kickback, the
workpiece may not be moved until after the machine
has come to a complete stop. Correct the cause for the
jamming of the saw blade before restarting the machine.
Unsharpened or improperly set saw blades produce nar-
row kerf causing excessive friction, blade binding and kick-
back.
mond versus round) of arbour holes. Blades that do not
match the mounting hardware of the saw will run eccentri-
cally, causing loss of control.
blades can easily break.
cooled. The saw blade becomes very hot while working.
Replace a defective insert plate. Without flawless insert
plates, injuries are possible from the saw blade.
paired only through an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
used. The storage location must be dry and lockable.
This prevents the machine from storage damage, and from
being operated by untrained persons.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
ly close your eyes and immediately turn your head
away from the beam.
Bosch Power Tools