Maintenance And Cleaning - nemaxx M1-Mini Original-Gebrauchsanleitung

CAUTION
Before using the alarm silence (mute), identify the source of the smoke and be
certain you are safe.
DANGER
If the alarm sounds, and it is not being tested, it means the unit is sensing smoke,
THE SOUND OF THE ALARM REQUIRES YOUR IMMEDIATE ATTENTION AND
ACTION.

MAINTENANCE AND CLEANING

In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and
debris.
Clean the alarm at least once a month to remove dust, dirt, or debris.
Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm
device.
This alarm has a low battery monitor which will cause the alarm to „beep" approx. every
40 seconds and the red LED flashes once at the same time for a minimum of thirty days
when the battery is low.
If there is a defective battery or other failures, you can refer to ‚ „Trouble shooting" for a
solution.
WARNING
The battery is sealed inside the cover and not replaceable.
Please replace the alarm if the low battery signal occurs.
IMPORTANT
Do not attempt to remove the cover to clean inside. This will affect warranty.
REPAIR
CAUTION
Do not attempt to repair the alarm. lt will affect your warranty.
Pack it in a well-padded carton, and ship to the original place you buy.
EN
6
Version: 5.0
20.01.2017