Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts; Waste Disposal And Environmental Protection - Grizzly EMH 2440 Originalbetriebsanleitung

Maintenance and cleaning

Leave all work not described
in this manual to an authorised
customer service centre. Only
use original parts.
Wear hand protection when work-
ing on the blade.
Before starting to service or clean
the unit, turn off the unit, pull the
power plug, and wait until the blade
stands still. There is a risk of injury
and a risk to life from electric shock,
fire and rotating blades.
General cleaning and
servicing
Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.

Replacement parts

Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you have any other questions, contact
the "Service-Center" (see "Grizzly Ser-
vice-Center").
Screw........................................ 91093082
Blade ........................................ 91093083
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization
location. The plastic and metal parts em-
ployed can be separated out into pure
materials and recycling can be implement-
ed. Ask your Service Center about this.

Guarantee

• We grant a 24-month warranty for this
appliance.This equipment is not suit-
able for commercial use. Commercial
use will invalidate the guarantee.
If you have reason to launch a claim
on guarantee, please call our ser-
vice centre. They will give you fur-
ther information on the complaints
management process.
• The guarantee does not cover damage
from natural wear, overloading or im-
GB
77