Grizzly EMH 2440 Originalbetriebsanleitung Seite 73

or medication. Always take a
break when you need one and
be sensible about how you
work.
• Switch the shredder off and
pull the plug under the follow-
ing circumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- before releasing a jammed
blade.
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance
work or replacing accesso-
ries;
- Before moving or lifting the
shredder
- If foreign objects should en-
ter the shredder, if the shred-
der is making unfamiliar
noises or vibrations (check
the shredder for damage be-
fore starting it up again)
• Do not allow shredded material
to accumulate near the ejection
area. This may otherwise hin-
der proper ejection and force
the material back up through
the feeder.
• Do not transport or tip the
shredder with the motor run-
ning.
• Keep hands, other body parts
and clothing out of the filling
chamber and ejection channel
and away from other moving
parts.
• In the event of blockages in
the machine intake or ejec-
tion, switch off the motor and
disconnect the machine from
the mains before removing
leftover material in the intake
opening or ejection channel.
Ensure that the motor is free of
rubbish and other accumula-
tions in order to safeguard the
motor from damage or possible
fire. Remember that the cutting
tool is also activated when the
starting mechanism is started
on a motor operated machine.
CAUTION! The following
states how damage to the
trimmer and possible injury to
people can be avoided:
• Handle the unit with care. Clean
the ventilation slits regularly; keep
to the maintenance instructions.
• Do not overload your device.
Work only within the indicated
range of performance. Do not
employ any low power ma-
chines for heavy work. Do not
use your device for purposes
for which it has not been de-
signed.
• Only switch the shredder off once
the funnel feeder is completely
empty since the shredder may
otherwise clog up and not be
able to start afterwards.
• Do not attempt to repair the
shredder yourself unless you
are qualified to do so. Any
work not specified in this man-
ual may only be carried out by
our service centre.
GB
73