AEG Deli 5 Bedienungsanleitung Seite 18

4 Tilt the motor head up until it locks by pressing the release lever ( 4 ) upwards.
BG
WARNING ! Keep fingers and hands away from areas between housing ( 11 ) and tilted motor head ( 10 ).
5 Place desired tool ( Whisk, dough hook or beater) by pushing it up on the attachment shaft and turn it
NL
counterclockwise until the pin is locked into position.
EN
6 Place the mixing bowl ( 7) into the bowl cramping plate (12 ) by turning it clockwise to lock into position.
WARNING! Never operate appliance with the attachments ON unless the mixing bowl (7) is in place and
FR
motor head (10 ) is down.
7 Tilt the motor head down until it locks by pressing the release lever ( 4 ) upwards.
DE
8 Plug into mains.
GR
9 Fill in your ingredients to process.
WARNING! Do not overf ill the machine to avoid spillover and motor overloaded. Use the splash guard
PT
to protect against liquid mixtures. Ingredients can be added directly to the bowl via the feed hole of
splash guard.
ES
10 Turn the speed control knob from 0 to desired speed (between 1 - 6, corresponding to the tools and
AR mixture ).
WARNING! With heavy mixtures ( example: bread dough ), do not operate the machine for more than
10 minutes continuously. Allow it to cool down for a further 20 minutes before continuing.
PRO Tips: While mixing dough, in order to avoid flour splash, keep the appliance at setting 1 for
60 seconds, then turn to desired speed.
PRO Tips: For pulse operation ( kneading at short intervals), turn and hold the knob to " P " position to
your desired timing. When the knob is released it returns automatically to the " 0" position.
11 After mixing completes, turn the knob back to 0.
12 Unplug the appliance.
13 Tilt the motor head up until it locks by pressing the release lever ( 4 ) upwards.
14 Remove the tool from attachment shaft by turning it clockwise and pull of f.
15 Remove the mixing bowl from the bowl cramping plate by turning it counterclockwise.
16 Take out the mixture from the mixing bowl.
PRO Tips: Mixture can be taken out with the help of spatula.
17 HOW TO USE THE SALAD MAKER*
• Choose your slicer / shredder ( B ) and insert it into the salad maker housing (A) by turning it clockwise.
Make sure the attachment is fully inserted.
WARNING ! The blades and inserts are very sharp!
• Push the attachment hub release button (2 ) to the right and remove the attachment hub cover.
Fit the assembled salad maker in the front attachment hub (3 ) using the attachment hub release
button (2 ). The attachment hub release button ( 2 ) will click into position once the salad maker is
securely attached.
• Place a mixing bowl ( 7) or other container under the attachment to collect the result.
• Cut the food into a size that fits the feed chute. Plug in the appliance and turn the speed selector
to desired speed.
• Feed the food into the feed chute by using the pusher ( C ).
WARNING ! Do not put your fingers or other utensils in the feed chute.
18 When finished using your attachment, turn of f the appliance and unplug it.
Place back the front attachment hub cover (13) using the attachment hub release button ( 2 ).