Herunterladen Inhalt Inhalt Diese Seite drucken

Radiodetection RD5000WL Bedienungsanleitung Seite 10

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Using accessories with the RD5000
At times, it may not be possible to use a locator to locate or identify a particular
target line due to inaccessibility. In these situations a stethoscope antenna or locator
signal clamp may be used to locate or identify individual target lines.
Radiodetection supplies a range of stethoscopes and locator signal clamps to suit
most applications and for more detailed information on accessories, please see the
RD5000 operation manual or go to www.radiodetection.com.
Applicable RD000/RD000/RD000 accessories are compatible with the
RD5000 locator and transmitter.
Getting started with the RD5000
To power on or power off the locator and transmitter, press and hold the On/Off key
for 2 seconds.
1.
Switch on the locator using the On/Off key. During start up, the locator will
display the unit model, date of last factory calibration (or eCAL) and software
version.
2.
Once powered, the locator will automatically default to Guidance Mode and in
this mode the following features will be displayed on the screen:
Target Position Indicator.
Compass.
Numerical signal strength.
Proportional left/right arrows.
Depth.
Current.
Battery level indicator for 10 seconds after a key press.
3.
A momentary press of the On/Off key will change the operating mode to Signal
Strength Mode. In this mode the following features will be displayed:
Compass.
Numerical signal strength.
Depth.
Current.
Battery level indicator for 10 seconds after a key press.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis