Audio Connections; Technical Specifications - Omnitronic QuickBTR-5.0 Bedienungsanleitung

Audio Connections

5
Depending on the mode of pairing (SINGLE/STEREO LINK), the two audio
connectors (XLR/3.5mmTRS) carry different signals, derived from the two
stereo channels sent by a Bluetooth device. Refer to the following table for
details:
Master Unit
Mode
L & R
SINGLE
(mono sum)
STEREO
LINK

Technical Specifications

6
Bluetooth protocol:
Profile:
Supported audio codecs:
Modulation:
Sensitivity:
Carrier frequency range:
Range:
Audio S/N ratio
Audio THD
Battery pack:
Battery operation:
Audio connections:
Charging port:
Dimensions:
Weight:
Specifications are subject to change without notice due to product improvements.
Master Unit
XLR 3.5mm TRS
(stereo)
L
(stereo)
QuickBTR 5.0
Slave Unit
L / R
L / R
Version 5.0
A2DPv1.3.1
SBC, ACC, APTX
GFSK, π/4 DQPSK, 8DPSK
-80 dBm
2.402-2.480 GHz
10 m (with line of sight)
>75 dB
<0.1%
Li-Ion 300 mAh
>8h
XLR (pin 1: ground, pin 2: +, pin 3: -)
3.5 TRS socket
Micro USB
26 x 27 x 111 mm
52 g
14 • EN
Slave Unit
XLR 3.5mm TRS
-
R
(stereo)
-
L / R