Dehn DEHNcare APHO Herstellerinformationen Seite 15

The arc-fault-tested protective hood APHO has been designed in accordance with the require-
ments for intended use pursuant to
- PPE regulation (EU) 2016/425
and inspected according to the following standards:
- EN 166: 2001
- EN 170: 2002
- GS-ET-29: 2011
- IEC 61482-2:2018
- IEC 61482-1-1:2010
- IEC 61482-1-2:2014
The aforementioned EN standards are listed at https://eur-lex.europa.eu.
Use:
The arc-fault-tested protective hood DEHNcare APHO can be used in conjunction with the safety
helmet for electricians series ESH U 1000 S ....
The safety helmet for electricians is not included!
Other safety helmets available on the market can be used; e.g. to EN 397. The following must be
ensured in this case:
Secure, comfortable fit of the helmet on the head
Â
Slots (30 mm) at the side for the clips of the protective hood APHO
Â
A horizontal space between the headband of the helmet and the visor – see illustration:
Â
3