Function Of The Keys - WolfVision EYE-12 Bedienungsanleitung

Function of the keys

#16 MENU key
Pressing this key for 1 second activates the on-screen menu (see page 10).
#17 FREEZE key
To freeze the current image. (see page 8). Pressing the FREEZE key for 2 seconds recalls preset 1
(see page 7).
# 18 MEMORY keys 1 - 9
For saving and recalling pictures (see page 8).
# 19 AF-indication LED (Autofocus)
For indicating the AF status (Autofocus) of the unit (green=on, dark=off).
# 20 ZOOM keys
Using the ZOOM keys also switches auto iris on again.
# 21 POWER key
Switches the unit on and off. When switching the unit on, the Visualizer automatically runs the power-on
preset.
# 22 SELECT keys (double function of MEMORY keys 2, 4, 6 and 8)
For navigating through the on-screen menu (see page 10).
# 23 HELP/RESET key for on-screen menu
While you are in the on-screen menu you can activate the on-screen help by pressing the HELP key.
Pressing this key for 2 seconds resets the selected menu item (see page 10).
# 24 AF key (Autofocus)
Switches the auto focus on and off. The AF indication LED (#19) indicates if the AF is switched on
(see page 6).
# 25 WHITE key
Activates one push WHITE BALANCE adjustment (see page 7).
# 26 Manual IRIS keys (brightness adjustment)
When the IRIS keys are pressed, the EYE-12 switches off the auto iris function. The next time the ZOOM
keys are used the auto iris is switched on again.
# 27 Manual FOCUS keys
For focusing the picture. When the Manual FOCUS keys are pressed the EYE-12 switches off the
autofocus function. Using the AF-key switches the autofocus function on again.
# 28 PRESET keys (programmable settings)
For storing a preset, press one of the PRESET keys for more than 2 seconds.
For recalling a preset, press the PRESET key quickly (see page 7).
# 29 ALL key
For displaying all 9 pictures of the memory as split image (see page 8).
# 30 LASER indication LED / IR-Code indication LED
For indicating the LASER status of the unit (red=on, dark=off).
When changing the IR-code on the IR-remote control, the LED flashes in accordance with the selected
IR-code (see page 14).
# 31 LASER POINTER key
Important: Do not stare directly into the beam. This is hazardous for your eyes!
# 32 IMAGE TURN mode key
For picking up vertical (portrait) pages with higher resolution (see page 8).
5