WolfVision EYE-12 Bedienungsanleitung Seite 19

Recommended Positioning of Light
Please consider light positioning for the EYE-12 carefully.
X X
Mounting the light too close to the unit will cause reflections,
2 2
mounting it too far away will cause shadows.
EYE-12
The illustration on the right shows the recommended position
of lighting for the EYE-12. The distance from the center of the
unit to the center of the light should be identical to the
Ceiling
MAXIMUM image size (e.g. vertical image size).
Light
Example: When the maximum vertical size of the pick-up are
(wide) would be 100cm, then the recommended distance of
axis
the light would be also 100cm away from the center of the
where
camera.
the
light
We recommend mounting the light like the position shown on should
be
the right, because here shadows are not too disturbing e.g.
mounted
when pointing with a pen at certain details on a document.
Due to the automatic white balance of the unit, it is possible to
use any type of light. WolfVision recommends a diffused light
with more than 300 Lux and a homogeneity of less than 15%
X
on the working surface.
To minimize reflections, please use the optional inclined
working surface (see page 19).
Floor
Flash Animation
A very easy method to find the ideal light position for the
EYE-12 is the dedicated flash animation program on
WolfVision's homepage: www.wolfvision.com (Support)
www.wolfvision.com (Support)
18