WolfVision EYE-12 Bedienungsanleitung Seite 20

Lightbox (optional)
An lightbox (bottom light) is recommended for dark
transparent material such as x-rays or for very small
transparent material such as slides.
When a lightbox is used, the room light may should be
dimmed or switched off.
When light conditions change, a white balance adjustment
should be performed to compensate the varying color
temperatures of different light sources (see page 7).
Inclined working surface (optional)
The Working plate has crystalline white surface for perfect
reproduction of transparencies and reflecting material like
photos or glossy brochures.
The working plate is 12° inclined in order to avoid reflections.
Tile Bridge (optional)
The Ceiling Tile Bridge is designed to help install the EYE-12
Camera into a standard grid of a suspended ceiling ( 2' x 2' or
2' x 4').
The Tile Bridge is made of aluminium to insure a light but
sturdy construction. It fits standard ceiling grids in American
and European sizes.
The EYE-12 is attached to the Tile Bridge via a camera
mount. The mount can be rotated 360 degrees and moved
across the Tile Bridge, in order to align the camera with the
working surface.
A white trim ring is included to dress up the ceiling tile once
the EYE-12 is properly adjusted and in place.
Close-Up Lens (optional)
Using the optional Close-Up Lens can be used to focus on
objects at a close distance to the EYE-12.
Technical Data:
Accessories from other manufacturers
Information on some accessories from other manufacturers which can be used with the EYE-12 is available
at: www.wolfvision.com (Products / Accessories)
High-resolution achromatic lens
Focus range:
Focal distance:
Lens diameter:
Attachment thread:
Weight:
WolfVision offers lightboxes for x-rays,
slides and transparencies in two sizes:
Details at: www.wolfvision.com
Size: 320 x 430 mm (12.6" x 16.9")
Height: 10-40 mm (0.4"-1.6") at 12°
310-460mm
f=477mm
50mm
M46 x 0.75
54g
19
LB-38: 430 x 359 mm (16.9" x 14.1")
LB-9: 300 x 210 mm (11.8" x 8.3")