Ir-Remote Control - WolfVision EYE-12 Bedienungsanleitung

Key panel on the EYE-12
#16 #17
FREEZE MEMORY
1
MENU
4
POWER
7
#21 #22
CODES
Storing presets:
Press one of the PRESET keys (#28) for 2 seconds.
Recalling presets:
Press the respective PRESET key (#28) quickly.
Alternative press the FREEZE key (#17) for 2 seconds to recall preset 1.
Storing images:
Press one of the MEMORY keys (#18) for 2 seconds.
Recalling images:
Press the respective MEMORY key (#18) quickly.
Filling the memory quickly:
Press the ALL key (#29) for more than 4 seconds and follow the instructions of the on-screen menu (Press
MEMORY 1 (#18) for snapshot or MEMORY 3 (#18) to erase the memory).
Activating the on-screen menu:
Press the MENU key (#16) for 1 second to activate the on-screen menu. Use the Number keys (#22) to
navigate. For the help function, press the Number 5 key (#23).
Switching the output mode:
Higher mode: Simultaneously press both FOCUS keys (#27) on the unit and
the Number 2 key (arrow-up) (#22) on the remote control.
Lower mode: Simultaneously press both FOCUS keys (#27) on the unit and
the Number 8 key (arrow-down) (#22) on the remote control.
Resetting the output mode to the default of "auto resolution":
Simultaneously press both FOCUS-keys (#27) on the unit and the Number 5 key (#23) on the remote control.
Resetting the on-screen menu:
For resetting the entire menu simultaneously press both FOCUS keys (#27) on the unit head and the
Number 4 key (back arrow) (#22) on the remote control.
For resetting only the selected item press the Number 5 key (#23) for 2 seconds.
Change IR code:
Change the IR code in the
remote control too by pressing s
from code A to B, C, D ... A ...in the order given. For resetting the remote control to code A simultaneously
p ress PRESET 1, PRESET 2
The LASER indication LED (#30)
B, three times for code C and four times for code D).
#18 #19 #20
ZOOM
2 3
HELP AF FOCUS
5 6
WHITE IRIS
8 9
#23 #24 #25 #26
on-screen menu "Misc. Settings" (code A is default).
imultaneously PRESET 1, PRESET 2
(# 28 and ZOOM WIDE )
shows the selected code (it flashes one time for code A, two times for code

IR-Remote Control

#20
#28
#19
#25
#17
#29
#27
#22
#16
(#28)
(# 20 ) (on the remote control).
21
TELE WIDE
PRESETS IMAGE TURN
1 2 3
A
WHITE WHITE AF AF FOCUS FOCUS
FREEZE FREEZE ALL IRIS
MEMORY
1 2 3
4 5 6
HELP
7 8 9
MENU POWER
Change the IR code on the
and ZOOM TELE (#20) to switch
#30
#20
#31
#32
#27
#26
#23
#18
#21