Product Features - eisenblatter POLY-PTX 802 HT Originalbetriebsanleitung

EN
Original instructions POLY-PTX
• Use a suitable extraction unit.
Reduce dust exposure with the following measures:
• Do not direct the escaping particles and the exhaust
air stream at yourself or nearby persons or on dust
deposits.
• Use an extraction unit and/or air purifiers.
• Ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or blowing
stirs up dust.
• Vacuum or wash protective clothing. Do not blow, beat
or brush.
20
802 HT / POLY-PTX AKKU HT
® ®
6.1. Power tool POLY-PTX
A1-1
A1-2
A1-3
A1-4
A1-5
A1-6
A1-7
A1-8
A1-9
A1-10
A2-1
A2-2
A2-3
6.2. Cordless operated power tool
B1-1
B1-2
B1-3
B1-4
B1-5
B1-6
B1-7
B1-8
B2-1
B2-2
B2-3
B2-4

6. Product features

page 2-3 (Figure A1and A2):
Safety cover
Additional handle
Locking Screw polycarbonate protective cover
Electronics signal indicator
Handle
Tool fixing screw
Tensioning spindle (with 2 captive fitted keys)
Polycarbonate protective cover
Speed adjustment wheel
Trigger switch
Dust Prevent System
Spindle locking button
Spacer rings (for tools shorter than the
tensioning spindle)
POLY-PTX AKKU HT – see page 4-5
®
(Figure B1 and B2):
Additional handle
Particulate matter protection cap
Battery pack
Tool fixing screw
Tensioning spindle (with 2 captive fitted keys)
Safety cover
Sliding on/off switch
Handle
Capacity indicator button
Capacity and signal indicator
Button to unlock battery pack
Spacer rings (for tools shorter than the
tensioning spindle)
802 HT – see
®
www.eisenblaetter.de