Product Features - eisenblatter MINI MAX 1100 Originalbetriebsanleitung

5.9 Reducing dust exposure:
Some of the dust created using this power tool
may contain chemicals known to cause cancer,
allergic reaction, respiratory disease, birth defects or
other reproductive harm. Some of these substances
include: lead (in paint containing lead), mineral dust
(from bricks, concrete etc.), additives used for wood
treatment (chromate, wood preservatives), some wood
types (such as oak or beech dust), metals, asbestos.
The risk from exposure to such substances will depend
on how long you or bystanders are being exposed.
Do not let particles enter the body.
Do the following to reduce exposure to these
substances:
• Ensure good ventilation of the workplace and wear
appropriate protective equipment, such as respirators
able to filter microscopically small particles.
• Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations, disposal).
• Collect the generated particles at the source, avoid
deposits in the surrounding area.
• Use suitable accessories for special work (see
chapter 8.), thus less particles enter the environment
in an uncontrolled manner.
• Use a suitable extraction unit.
Reduce dust exposure with the following measures:
• Do not direct the escaping particles and the exhaust
air stream at yourself or nearby persons or on dust
deposits.
• Use an extraction unit and/or air purifiers.
• Ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or blowing
stirs up dust.
• Vacuum or wash protective clothing. Do not blow, beat
or brush.
www.eisenblaetter.de
Original instructions MINI MAX

6. Product features

6.1. Power tool MINI MAX
see page 2, figures A1 and A2:
A1-1 Handle
A1-2 Spindle locking button
A1-3 Locking screws protective cover
A2-1 Protective cover
A2-2 Additional handle
A2-3 Sliding on/off switch
A2-4 Particulate matter protection cap
A2-5 Tool holder (collet 6 mm)
A2-6 Speed adjusting wheel with electronics signal
indicator
6.2. Cordless operated power tool MINI MAX
see page 4, figures H1 and H2:
H1-1 Capacity indicator button
H1-2 Capacity and signal indicator
H1-3 Protective cover
H1-4 CAS Battery pack
H1-5 Button to unlock battery pack
H1-6 Spindle locking button
H1-7 Locking screws protective cover
H2-1 Additional handle
H2-2 Handle
H2-3 Tool holder (collet 6 mm)
H2-4 Sliding on/off switch
1100 / MINI MAX AKKU
® ®
1100,
®
EN
AKKU,
®
21