Ec-Declaration Of Conformity; Specified Conditions Of Use; Symbols - eisenblatter POLY-PTX 802 HT Originalbetriebsanleitung

EN
Original instructions POLY-PTX
English
Table of contents
1. EC-Declaration of conformity . . . . . . . . . . . . . . . . 16
2. Specified conditions of use . . . . . . . . . . . . . . . . . 16
3. Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. General safety information . . . . . . . . . . . . . . . . . . 17
5. Special safety instructions . . . . . . . . . . . . . . . . . . 17
6. Product features . . . . . . . . . . . . . . . . . . . . . . . . . 20
7. Technical specifications . . . . . . . . . . . . . . . . . . . . 21
8. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9. Initial operation . . . . . . . . . . . . . . . . . . . . . . . . . . 22
10. Switching on and off . . . . . . . . . . . . . . . . . . . . . . 24
11. Attaching the tools, working notes . . . . . . . . . . . . 24
12. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 25
13. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
14. Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
15. Environmental protection . . . . . . . . . . . . . . . . . . . 25

1. EC-Declaration of conformity

We declare under our sole responsibility that the product
described under "7. Technical Data", identified by type
and serial number, fulfills all the relevant provisions of
the directives 2011/65/EU (RoHs), 2004/108/EC
(until April 19th 2016), 2014/30/EU (from April 20th
2016), 2006/42/EC and the following harmonized
standards have been used:
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011 +A2:2013+A11:2014+A12:2014
+A13:2015
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Gerd Eisenblätter GmbH
Jeschkenstraße 12d
82538 Geretsried
Germany
Geretsried, 2020-01-15
Gerd Eisenblätter,
CEO Gerd Eisenblätter GmbH
16
802 HT / POLY-PTX AKKU HT
® ®
The burnishing machine is suited for
• burnishing, deadening, structuring and brushing,
• polishing and smoothing,
• sanding and deburring the following materials:
It is for dry processing only.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention regulations and
the enclosed safety information must be observed.

2. Specified conditions of use

- metal, wood and plastics.

3. Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions
Wear ear protection
Wear protective gloves
Wear a dust mask
Wear protective goggles
Wear sturdy shoes
Do not dispose of it with domestic waste
Tip, advice
CE marking: Confirms the conformity of the
power tool with the European Community
directives.
www.eisenblaetter.de