Product Features - eisenblatter TOPRAIL 1100 HT Originalbetriebsanleitung

5.3 Reducing dust exposure:
Some of the dust created using this power tool
may contain chemicals known to cause cancer,
allergic reaction, respiratory disease, birth defects or
other reproductive harm. Some of these substances
include: lead (in paint containing lead), mineral dust
(from bricks, concrete etc.), additives used for wood
treatment (chromate, wood preservatives), some wood
types (such as oak or beech dust), metals, asbestos.
The risk from exposure to such substances will depend
on how long you or bystanders are being exposed.
Do not let particles enter the body.
Do the following to reduce exposure to these
substances:
• Ensure good ventilation of the workplace and wear
appropriate protective equipment, such as respirators
able to filter microscopically small particles.
• Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations, disposal).
• Collect the generated particles at the source, avoid
deposits in the surrounding area.
• Use suitable accessories for special work (see
chapter 8.), thus less particles enter the environment
in an uncontrolled manner.
• Use a suitable extraction unit.
Reduce dust exposure with the following measures:
• Do not direct the escaping particles and the exhaust
air stream at yourself or nearby persons or on dust
deposits.
• Use an extraction unit and/or air purifiers.
• Ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or blowing
stirs up dust.
• Vacuum or wash protective clothing. Do not blow, beat
or brush.
www.eisenblaetter.de
Original instructions TOPRAIL 1100 HT

6. Product features

TOPRAIL 1100 HT, see page 2, figure A1
and page 3, figure A2:
A1-1 Star grip screw
A1-2 Front guide arm
A1-3 Handle
A1-4 Spindle locking button
A2-1 Adjustable additional handle
A2-2 Finger and belt protection
A2-3 Rear guide arm
A2-4 Pulley (small)
A2-5 Pulley (large)
A2-6 Particulate matter protection cap
A2-7 Drive roller
A2-8 Protective cover
A2-9 Sliding on/off switch
A2-10 Speed adjusting wheel with electronics signal
indicator (see page 3, figure F)
EN
15