Zolia ZD 180 Bedienungsanleitung Seite 5

SETTING GUIDELINES
▢ Testing before use
◾ Plug in and switch on the feeder
Short press the manual feed button, the feeder will instantly romate one portion. Repeat
◾
this step for 3 times to make sure the feeder works normally.
▢ Set the current time
◾ Long press the set button, the hour digits will flash. Please increase/decrease the value
button to set the current hour and then short press the set button again to save. Repeat the
step to set the minutes.
Below pictures are the example: the current time is 21:51.
▢ Setting the first meal time
Once the current time saved, the feeder will enter meal time setting mode. The "1" meal
◾
icon next to "ML" starts flashing, press the increase/decrease button to set "ON" or "OFF".
"ON" means feeding; "OFF" means no feeding.
◾ If you set "ON" for the 1st meal, Next step:setting meal time
Setting feeding time (hour)
ON = Feeding OFF = No feeding
Setting feeding time (minute)
5