Zolia ZD 180 Bedienungsanleitung Seite 4

OPERATING PANEL INTRODUCTION
A
D E
A- Setting
◾ Long press : Setting status
Short press: Confirmed or for next step
◾
B- Time
(Standby state): Current time
◾
◾ (Setting state): Setting current time first and then setting the feeding time of each meal
C- Value adjustment (increase) or manual feeding button
(Standby status) short press: Manual feeding
◾
(Setting status) short press: Increase value
◾
(Setting status) Long press: Increase the value quickly
◾
D- Lock button
Long press: Unlock (hear two beeps); Locked ( hear a long beep)
◾
Short press : Back to step
◾
The screen will be locked automatically without operating for 3 minutes
◾
E- Number of meals
Setting status: the digit flashing
◾
Not feeding: the number of meal will not show
◾
F- Battery indicator
No indicator light: sufficient battery power
◾
Indicator light flashing : without battery
◾
◾ Indicator light flashing interval: the battery is in low level
Indicator light flashing twice: need replace new battery
◾
G- Value adjustment (Decrease) or record and playback button
(Standby status) long press: Record or cancel recording
◾
◾ (Setting status)short press: Decrease value
(Setting status) Long press: decrease the value quickly
◾
Note : To clear all setting, restore the factory setting:
Make sure the screen is unlocked. Long press the set button and the manual feed button for 2
seconds until hearing beeps.
B
F
C
G
4