Verwandte Anleitungen für Zolia Gabon
Inhaltszusammenfassung für Zolia Gabon
- Seite 1 Zolia Gabon Parrot Cage / Cage Zolia Gabon pour perroquets / Jaula para loros ZOLIA Gabon / Papageienkäfig Zolia Gabon / Gabbia per pappagalli Zolia Gabon / Gaiola Zolia Gabon para papagaio / Zolia Gabon voor papegaaienkooi...
- Seite 2 ES- A - Panel frontal izquierdo EN- A- Left front panel wire mesh FR- A- Panneau avant gauche DE- A- Linke Frontplatte B- Right front wire mesh B- Panneau avant droit B- Panel frontal derecho B- Rechte Frontplatte C- Left back wire mesh C- Panneau arrière gauche C- Panel trasero izquierdo C- Linke Rückwand...
- Seite 3 IT- A - P annello frontale sinistro NL- A - Linker voorpaneel PT- A- Painel frontal esquerdo B- Pannello frontale destro B- Painel frontal direito B- Rechter voorpaneel C- Pannello posteriore sinistro C- Painel traseiro esquerdo C- Linker achterpaneel D- Pannello posteriore destro D- Painel traseiro direito D- Rechter achterpaneel...
- Seite 4 EN - P ut frame M inside the baffle of J (close-up-1), make holes aline and hold on, meanwhile put A in front as drawing, then insert W1 (2pcs) into holes of A, J, M together and screw them up.Fix pannel C as same step above (position as drawing’s shown). FR-...
- Seite 5 1bis 1bis EN- P ut the second piece of M into other side of J and hold on, meanwhile insert pannel D into C (close-up), then screw D,J, M together with W1 (2pcs).Fix pannel B to A as same step above, screw B,J, M with W1 (2pcs). FR- ...
- Seite 6 EN- Fix S (4pcs) onto K (2pcs) separately, then screw them with R (4pcs) and W5 (8pcs). (Position as shown) Connect L (2pcs, hole upwards) to A&C, B&D with W6 (8pcs) separately, then connect X (2pcs) to A&C, B&D with W2 (4pcs). (Position as drawing, hole is the same level to door frame) FR-...
- Seite 7 EN- Slide K (2pcs) into hole of L as shown position, put cristate wire on K (2pcs) into holes of G (2pcs) separately, then screw with W2 (4pcs) on shoulder position. Insert Y (6pcs) into the hole of cage leg. FR...
- Seite 8 EN- P ut F on top position, screw with W3 (4pcs) in between and W2 (4pcs) on both side. (arrow position) Insert I (2pcs) on upper and H (2pcs) on bottom position. Insert E between 2 doors of cage. FR-...
- Seite 9 EN- C onnect N2 & N3, screw both with W5, connect N1 to N2&N3 with W5 and screw with nut V2 separately (as drawing). Finally put perch in cage and cup on holders. ( all protruding parts on N1, N2, N3 insert holes on cage around) FR-...