Functional Description - Carrier 40VCI67FQEE Installations- Und Benutzerhandbuch

Functional description

8. Up-and-down SWING Angle
Each time you press the button
display will follow the sequence:
HEAT MODE:
Other modes:
9. Right-and-left SWING Angle adjustment
Each time you press the button
control will display the following cycle:
10. Round-way cassette swing angle adjustment
Each time you press the button, remote control will display
the following sequence:
Press button to select the blade and the selected
blade will flash. Press "Up-and-down Angle" button to
adjust the airflow angle of the selected blade.
11. SLEEP
Press the button, and the remote controller screen
will display "Sleep". The SLEEP time is fixed to 8 hours and
is not adjustable. Press the
the sleep function.
Note:
(1) Sleep function is invalid in FAN mode.
(2) Sleep function is only valid when the unit is turned on.
12. HEALTH
(1) When the controller is switched on, press
to activate and display "HEALTH" icon on the LCD display.
(2) When the controller is turned off, press the
enter the FAN mode, start low wind and display "HEALTH" icon.
(3) If Health function is set and activated, Press Health
button to cancel and stay in HEALTH mode.
13. Health AIRFLOW
Press the button and the remote controller screen
displays "AIRFLOW ".
Press again to cancel this function.
14. HEATER
Press the button, and the remote controller will
display "HEATER".
Press button again, the "HEATER" on the remote control-
ler will disappear, and the HEATER function will be turned off.
Note : Heater function is only valid in AUTO and HEAT mode.
15. LIGHT
Press the button to activate the light function.
Press the button again, and the light function is turned off.
, Remote control
, the remote
button again, to cancel
button,
button to
16. CLOCK
Press the button, the time displayed on the remote
controller flashes before the clock adjustment.
Press the button once again to increase or decrease the
time by one minute. Holding the button will quickly increase
or decrease the time.
To complete the set time, press
to confirm.
17.TIMER
(1) When the controller is on, you can only set the TIMER OFF.
And when the controller is off, you can only set the TIMER ON.
When the remote controller is off, press the
adjust TIMER ON.
When the remote controller is on, press the
to adjust TIMER OFF. When entering the timing adjustment
process, if the timer ON/ OFF icon and clock flash at the
same time, the initial default value is:12:00. Press the
button to increase or decrease the timeby 1 minute, pressing
and holding the button will speed up the adjustment.
After the time adjustment is completed, press the
button again to confirm. Then the time will statically display,
and start the countdown.
18. MENU
Press the button, Functional cycle is as follows :
TURBO →FRESH→IFP AC OFF→IFP AC ECO→3D AIR
(reserved)→ →10°C heating (Only valid in HEAT
mode)→°F/ °C→TURBO
1. Press button, the current function to be set flashes;
2. Press button again to set/ cancel the current setting
function in the above sequence. If there is no operation in 5
seconds, it will automatically exit.
19. Wi-Fi Configuration
Press button for 3s to enter Wi-Fi configuration, remote
controller displays COOL mode, LOW fan speed and 30°C.
Or you can enter the Wi-Fi configuration through the setting
in Cooling mode, Low fan speed and 30°C.
20. SELF-CLEAN
Press the combined button
remote controller will display "SELF-CLEAN".
Press button or
self-cleaning function.
Note: The "SELF-CLEAN" function is invalid under "SLEEP"
function and "TIMER" function.
21. LOCK
Press the combination key button
the remote controller screen will display "
the remote control become invalid.
Press the combination button
cancel the lock, the icon "
on the controller will become valid.
2
button again
button to
button
and , and the
button to exit the
and
". All buttons on
and again to
" will disappear and all buttons
, and