Technical Specifications; Package Contents - Parkside PDSS C3 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Technical specifications

 
Working pressure:
Compressed
air quality:
Volumetric flow rate:
Tyre inflator
Air blow gun
A-weighted sound
pressure level (Lpa):
Air blow gun:
A-weighted sound
power level (Lwa):
Uncertainty:
Measured value determined according to
EN 14462 (EN1953:2013).

Package contents

 
1 pneumatic tyre inflator with pressure gauge
1 pneumatic air blow gun
2 extension nozzles
1 adapter set (8-piece)
1 set of operating instructions
  S afety instructions for
pneumatic tools
PLEASE READ THROUGH
THE OPERATING
INSTRUCTIONS CAREFULLY BEFORE
USE. THESE FORM PART OF THE
PRODUCT AND MUST BE AVAILABLE
AT ALL TIMES!
292180 Druckluft-Einstiegs-Zubehoer-Set_content_LB6.indb 7
All manuals and user guides at all-guides.com
Introduction/Safety instructions for pneumatic tools
tools are used, basic safety precau-
max. 8 bar
tions must be taken in order to avoid
clean, oil-free and
the risk of fire, electric shock or
moisture-free
personal injury. Before first using the
product, please ensure you read and
40–70 l/min
follow these operating instructions in
70–130 l/min
full and keep them in a safe place.
Tyre inflator: 84 dB(A)
The manufacturer accepts no liability
87.7 dB(A)
for losses, damage or personal injury
Tyre 95
caused by a failure to follow these
inflator: dB(A)
operating instructions.
Air blow 98.7
gun: dB(A)
K = 3 dB(A)
are foreseeable when using handheld
pneumatic equipment for general-
purpose work. However, users must
themselves consider the risks that can
occur when using the equipment for
a specific application.
INJURY!
Switch off the compressed air supply
before changing tools and settings or
performing maintenance.
HAZARD!
„
When pneumatic
The dangers stated
DANGER OF
EXPLOSION
Never use petrol or other

flammable liquids to clean the
pneumatic device! Residual fumes
in the pneumatic device could be
ignited by sparks and cause the
pneumatic device to explode.
7
GB/IE/NI
27.11.17 13:50