Equipment Setup And Use; Prior To Use; Setup - Skytron Levitator III Gebrauchsanleitung

INSTRUCTIONS FOR USE
3

Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

Setup:

1. The stirrups mount to the table rails using standard rail clamps.
2. Locate clamps adjacent to the patient's hip joint. The boots are marked (on
the bottom) for the patient's left and right.
3. Obtain adequate help to place both legs into the stirrups simultaneously, to
adjust for patient leg length, and loosen boot lock handle and gently slide boot
up or down the bar, slightly flexing the knees. Then satisfied with the position, re-
tighten the boot lock handle.
Document Number: 80028207
Version: A
Page 12
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E