Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick Erasure Function
Press the
Green
2.Erase.
Press and hold the
order to erase all DTCs more quickly and in one step only.
I/M Readiness Status
The I/M Readiness function is used to check the operations of the
Emission System on OBD II compliant vehicles.
An I/M Readiness Status result of "NO" does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection.
Possible Messages
YES
All monitoring programs supported on the vehicle have
completed their diagnostic testing and the MIL light is not
on,
NO
At least one monitoring supported on the vehicle has not
completed its diagnostic testing, and/or the "Check Engine"
(MIL) light is on,
READY
Indicates that a particular monitoring being checked has
completed its diagnostic testing,
Not RDY
(NOT READY) - indicates that a particular monitoring being
checked has not completed its diagnostic testing,
N/A
The monitoring is not supported on that vehicle,
"→"
a flashing Right Arrow indicates additional information is
available on the next screen,
"←"
a flashing Left Arrow indicates additional information is
available on the previous screen.
All manuals and user guides at all-guides.com
Operation
button and select the function menu
Red
button for about 3 seconds in
20
MENU:
2.ERASE
Werbung
Inhaltsverzeichnis
