Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Diagnostic trouble codes are retrieved
If there are any diagnostic trouble codes, then the total
number of the fault codes followed by that of the pending
codes will be displayed. The pending codes are displayed
on the second line.
If the trouble code is a pending code "P" will be
displayed.
To view previous codes, press the
through to the end, and then start from the beginning of
the list.
You will find in the enclosed booklet diagnostic trouble codes the
definitions for the retrieved DTC(s).
Erasing the diagnostic trouble codes
Do not erase the codes before the system has been checked
and repaired completely by technicians or yourself.
If you decide to erase the DTCs, select the function menu
2. Erase with the
A message of "ERASE? YES NO" comes up asking for
confirmation. If you do not want to proceed with erasing
the codes, press the
erase the codes, then press the
If the code is cleared successfully, an "ERASE DONE!"
message will appear on the display. Press the
button to exit.
If the code is not cleared, then an "ERASE FAIL!"
message will appear. Press the
the menu list. Please check once more if the error is
repaired! Select the function menu 2.Erase again and
erase the trouble code as described above. If necessary disconnect the
OBD II code reader and wait some minutes after connecting again. Follow
the hints from page 18.
All manuals and user guides at all-guides.com
Operation
Green
button.
Red
button to exit. If you want to
Green
Green
Red
button to scroll
button.
button to return to
19
FAULT:02
PEND:02
P0101
01/04
P0005P
03/04
MENU:
2.ERASE
ERASE?
YES NO
ERASE
Green
DONE!
ERASE
FAIL!
Werbung
Inhaltsverzeichnis
