Zipper ZI-RMM95 Bedienungsanleitung Seite 17

6.3 Inflate tyres
ALWAYS
instructions! Non-Compliance can lead
to sever injuries or even death!
ZIPPER-Maschinen can not be held
liable for any damages!
Always check whether tyre and rim
match together in all technical as-
pects.
Check extensively, whether there is
any damage or anormality of the tyre
or rim and check whether the tyre is
really mounted onto the rim correctly.
NEVER exceed the max. tyre pressure
recommended by the tyre manufac-
turer.
When inflating air into the tyre, check
the pressure frequently, check
regularily the tyre shape.
During the air inflating process itself
keep yourself away from the tyre as
much as possible.
In order to inflate a tyre connect the provided
inflating device to the air hose (14).
Connect the inflating device to the tyre valve.
Through pressing the lever of the inflating device
air gets inflated into the tyre.
7 MAINTANCE AND UPKEEP
No cleaning,
maintenance when machine is being
connected to power supply or pres-
sure air supply.
The machine does not require much mainte-
nance. However, to ensure a long lifespan, we
recommend you to
maintenance plan. Repairs and spare part chang-
es may be performed by certified technicians
only. Use only original ZIPPER spare parts!
IMPORTANT: deaerate the machine at least every
3 months completely!
All manuals and user guides at all-guides.com
D A N G E R
comply to following
A T T E N T I O N
upkeep, checks
follow the upkeep
Upkeep and Maintenance Plan
Clean tyre disc and
lubricate clamping
jaw joints.
Lubricate Swing arm
(9), mounting bar
(8) and all other
moving parts and
joints
Check and tighten all
screw fittings if nec-
essary.
Check drive belt ten-
sion
Deaerate entire hy-
draulic system com-
pletely
Cleaning
Clean the tyre disc and the clamping jaws after
every operation!
The usage of solvents, aggressive
chemicals or scouring agents dam-
ages the machine surfaces
Check lubricant level
or
Check the lubricant level in the lubricant contain-
er (17). Add SAE 30 oil if necessary.
Check drive belt tension
Remove the cover on the left side of the tyre
and
changing machine to gain access to the drive
belts. For this unscrew the four fixing screws of
the cover and remove it.
If the belt is not tightened sufficiently or is dirty
or polluted with lubricants, it might slip on the
pulleys and cause stalling.
Regularily after Opera-
tion
monthly
monthly
monthly
Every 3 months
N O T I C E
17